Special Flexible Metal Hose

Special Flexible Metal Hose

 

Jacketed Assembly

Jacket_Hosed Special Flexible Metal Hose - Flexible Metal Hose Manufacturer | Hengshui Ruiming

When conveyants must be maintained at a specified temperature, steam jacketing is used frequently, often in lieu of electric tracing.

 

 

Tracers

Tracers Special Flexible Metal Hose - Flexible Metal Hose Manufacturer | Hengshui Ruiming

Traced assemblies are similar in concept to jacketed assemblies in that there is an inner, smaller diameter hose encased by a single large diameter hose. Where jacketed assemblies surround the media with heat or cold, traced assemblies have the media surround the hose containing the heating or cooling element. The tracer, or inner hose, may also be installed in a long 'U' shaped loop within the outer hose, with the steam inlet and outlet at the same end of the assembly.

 

 

Guarded Assembly

guarded_metallic_hose_assembly Special Flexible Metal Hose - Flexible Metal Hose Manufacturer | Hengshui Ruiming

Use of an external flexible armor protects metal hose from abuse due to rough handling, abrasion and bending below it's limits. Often a rubber cover can accomplish this as well as armor if temperatures will permit

 

 

Lined Assembly

Liner Special Flexible Metal Hose - Flexible Metal Hose Manufacturer | Hengshui Ruiming

If high conveyant velocities are required, use of an internal flexible metal liner will prevent damage and reduce abrasion problems.